home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1996 #15
/
Monster Media Number 15 (Monster Media)(July 1996).ISO
/
games_du
/
dukeres.zip
/
DUKERES.TXT
< prev
next >
Wrap
Text File
|
1996-05-06
|
3KB
|
99 lines
Duke Nukem 3D Resolution Changer v1.2 Readme File
CONTENTS
(1) INTRODUCTION
(2) PROGRAM USAGE
(3) WHAT'S NEW IN v1.2
(4) TROUBLESHOOTING
(5) DISTRIBUTION NOTICE
(6) COPYRIGHT NOTICE
(7) DISCLAIMER
INTRODUCTION
The Duke Nukem 3D Resolution Changer v1.2 is a program that allows you
to run Duke Nukem 3D Shareware v1.3d in any resolution you want to just
as long as your monitor and video card can support that mode.
PROGRAM USAGE
To use this program successfully, place it into your Duke Nukem 3D
directory (Example: C:\DUKE3D) Run the EXE called DUKERES.EXE.
You will then be prompted to enter the width and the height that
you want Duke Nukem 3D to be displayed in. The following is a list
of common display modes that should work with Duke Nukem 3D:
Width x Height
320 x 200
320 x 240
320 x 400
640 x 480
800 x 600
1024 x 768
1600 x 1200
Please note that these are not the only modes that are supported. You
can specify whatever dimensions you want. It's up to your monitor and
video card to allow other modes to work. So experiment! Ok, after
you've entered the screen width and height, you will be prompted if you
want VESA support to be used. Choosing yes is recommended if you choose
a video mode higher than 320 x 240. That's it! Now run Duke Nukem 3D
and experience Duke in a whole new way, with good graphics!
WHAT'S NEW IN v1.2
1. Program does not have to be run off of the D: anymore as it did
in v1.1. So now this program will actually work for everyone
who has v1.3d.
2. Error trapping has been added.
TROUBLESHOOTING
When you run Duke Nukem 3D, if it says VESA does not support the mode
specified, then probably your video card does not support that mode.
Run DUKERES.EXE again and then choose one of the common video modes
specified above. If you still receive an error, then maybe you need
to load a VESA driver such as UNIVBE.EXE. This driver is available
for download on major online services and the Internet. If all else
fails, delete your DUKE3D.CFG and run SETUP.EXE again to configure
Duke Nukem 3D for your system.
If you have any questions or comments about the Duke Nukem 3D Resolution
Changer v1.2, please contact me at one of the following e-mail addresses:
CompuServe: 75453,3331
Internet: 75453.3331@compuserve.com
Also be sure to check out the new web site called Duke Nukem 3D HQ!!!
The address for it is:
http://ourworld.compuserve.com/homepages/Blackhand/duke3d.htm
DISTRIBUTION NOTICE
This program, the Duke Nukem 3D Resolution Changer v1.2 is freeware.
This means that you can freely distribute this program just as long
as you don't charge people for it and no modifications have been
made to the original files.
COPYRIGHT NOTICE
Duke Nukem 3D Resolution Changer v1.2
Programmed By: Jason Clay
Copyright 1996 Innovative Tech Inc.
Duke Nukem 3D is copyrighted under 3D Realms and is in no way affiliated
with Innovative Tech Inc.
DISCLAIMER
THIS SOFTWARE IS SOLD "AS IS". INNOVATIVE TECH INC., 3D REALMS
OR ANY OF THEIR CLIENTS WILL NOT BE RESPONSIBLE FOR ANY DAMAGE
RESULTING FROM THE MISUSE OF THIS PROGRAM. YOU, THE USER ARE
TO TAKE FULL RESPONSIBILITY FOR ANY DAMAGES OCCURING TO YOUR
SYSTEM WITH THE USE OF THIS PROGRAM.
(In other words, you can't sue us for anything, no matter what!)